# Wing
# the x axis is along the beam going from the root to the right tip;
# the y axis is pointed to the front of the wing
# the z axis is pointed up
#
#		^ y
#		|
#		|
#	  o-------> x
#	  z
#

# general references

# ground
reference: RF_wing,
	reference, global, null,
	reference, global, eye,
	reference, global, null,
	reference, global, null;
	
# wing root
reference: RF_wing_root,
	reference, RF_wing, null,
	reference, RF_wing,
			matr,
			1.,0.,0.,
			0.,+cos(pitch_inf),-sin(pitch_inf),
			0.,+sin(pitch_inf),+cos(pitch_inf),
	reference, RF_wing, null,
	reference, RF_wing, null;
	
	
# beam/element
set: integer curr_beam = beam_1;
set: real RF_beam_offset = 0.0;
include: "beam.ref";

set: curr_beam = beam_2;
set: RF_beam_offset = 1.0;
include: "beam.ref";

set: curr_beam = beam_3;
set: RF_beam_offset = 2.0;
include: "beam.ref";

set: curr_beam = beam_4;
set: RF_beam_offset = 3.0;
include: "beam.ref";

set: curr_beam = beam_5;
set: RF_beam_offset = 4.0;
include: "beam.ref";

set: curr_beam = beam_6;
set: RF_beam_offset = 5.0;
include: "beam.ref";

set: curr_beam = beam_7;
set: RF_beam_offset = 6.0;
include: "beam.ref";

set: curr_beam = beam_8;
set: RF_beam_offset = 7.0;
include: "beam.ref";

set: curr_beam = beam_9;
set: RF_beam_offset = 8.0;
include: "beam.ref";

set: curr_beam = beam_10;
set: RF_beam_offset = 9.0;
include: "beam.ref";

set: curr_beam = beam_11;
set: RF_beam_offset = 10.0;
include: "beam.ref";

set: curr_beam = beam_12;
set: RF_beam_offset = 11.0;
include: "beam.ref";

set: curr_beam = beam_13;
set: RF_beam_offset = 12.0;
include: "beam.ref";

set: curr_beam = beam_14;
set: RF_beam_offset = 13.0;
include: "beam.ref";

set: curr_beam = beam_15;
set: RF_beam_offset = 14.0;
include: "beam.ref";

set: curr_beam = beam_16;
set: RF_beam_offset = 15.0;
include: "beam.ref";